Key Performance BenefitsHigh-Density 2U Power Modules — Packs 30kW of double-conversion power into each 2U module, enabling dense capacity growth inside a narrow 600mm cabinet.Scalable 30-120kW Architecture — Capacity expands incrementally from 30kW to 120kW without pre-provisioning, aligning capital spending with actual load demand.High Efficiency (97.5%) — Advanced double-conversion topology reduces energy waste and heat rejection, supporting lower facility cooling requirements.Dynamic Online Mode (99%) — Balances energy savings with continuous power conditioning, keeping efficiency high during stable grid conditions.Unitary Power Factor (1.0) — Delivers active power matched to modern IT loads without derating, improving usable capacity per module.Hot-Swappable Modules — Power and bypass modules can be replaced while the system remains online, supporting continuous service during maintenance.Flexible Battery Support — Compatible with both VRLA and lithium-ion battery systems for varied backup autonomy requirements.Technical SpecificationsTechnical IndicatorSpecification Detail (APM2 30-120kVA)Power Rating30kW - 120kW (Scalable in 30kW steps)TopologyModular Online Double ConversionDouble Conversion EfficiencyUp to 97.5% (Dynamic Online up to 99%)Output Power Factor1.0 (Unitary)Module Form Factor2U / 30kW High-Density ModuleCabinet Footprint600mm Wide (Integrates bypass and distribution)Parallel CapabilityUp to 4 systems in parallelAPM2 120kVA: Compact Power for the Edge Computing EraEdge and colocation facilities frequently operate within tight floor constraints, where conventional tower UPS systems consume space that could otherwise host revenue-generating IT equipment.Pre-sizing power for future growth often forces operators to over-invest in capacity that remains idle for years, inflating upfront capital and recurring maintenance costs.The Vertiv Liebert APM2 resolves both constraints through a modular 30-120kVA architecture housed in a compact 600mm-wide cabinet that integrates bypass and distribution.Capacity grows incrementally by adding 2U, 30kW power modules, letting operators right-size today while preserving a low-cost path for tomorrow's expansion.With a double-conversion efficiency reaching 97.5%, the APM2 lowers heat dissipation per kilowatt, directly reducing the cooling load in high-density edge rooms.The unitary power factor (1.0) ensures each 30kW module delivers close to its rated active power, avoiding the capacity penalty seen in lower-PF legacy systems.Compared to fixed-capacity UPS designs, the APM2 avoids stranded capacity by scaling in granular steps, keeping utilization and efficiency high at partial load. Its hot-swappable power and bypass modules enable maintenance without transfer to raw utility, a distinction from systems that require full bypass operation during service.Adopting the Vertiv Liebert APM2 provides a strategic advantage for operators balancing space efficiency with growth flexibility. The 600mm cabinet design reduces the physical footprint of power infrastructure, freeing floor area for IT load and improving the revenue density of every square meter. Because capacity is added in 30kW increments, capital expenditure tracks actual demand rather than speculative forecasts, improving return on investment and simplifying budget planning. The 97.5% efficiency and unitary power factor contribute directly to lower energy and cooling costs over the system life, while hot-swappable modules minimize service disruption and maintenance complexity. For edge sites, colocation providers, and regional data centers, the APM2 delivers a future-ready platform that scales without re-engineering, protecting both the initial investment and the long-term path to higher density deployments.Technical FAQQ: Can the APM2 operate with lithium-ion batteries?A: Yes, the APM2 supports both VRLA and lithium-ion battery configurations, offering flexibility in backup autonomy and footprint.Q: How many APM2 systems can be paralleled?A: Up to four APM2 systems can operate in parallel, supporting higher capacity or N+1 redundancy configurations.

Our warehouse is located in the core logistics area with convenient transportation, covering an area of 1000 square meters, designed specifically for efficient, safe, and convenient storage and distribution.

There are brand new UPS (uninterruptible power supply), precision air conditioning, and various types of telecommunications power products from brands such as Vertiv, Huawei, Eltek, and Delta in the warehouse, as well as base station and data center equipment. These products are stored properly under intelligent management and environmental control, ensuring that every customer can receive the highest quality and most reliable products.

Whether it is large equipment or small electrical products, there are strict quality inspections and records at every step from warehousing to outbound, ensuring the safety and cycle management of goods.

In addition to efficient warehousing services, we also provide comprehensive logistics distribution, covering multiple transportation modes such as sea, land, and air, ensuring worry free storage and instant delivery of goods.