Key Performance Benefits3000W per 1U Module — Higher output per slot means fewer modules are needed to reach a target site capacity, preserving shelf positions for future radio load growth.62.5A Output at 48V — A single module carries the current demand of multi-band 5G radio units, reducing the module count per site.>96.5% HE Efficiency — High-efficiency conversion limits heat output so that dense shelves stay within cabinet thermal budgets.Standard Flatpack2 1U Footprint — 109 x 41.5 x 327 mm modules share the same shelf envelope as lower-rated units, allowing mixed-capacity layouts in one rack.85-300 VAC Input Window — Sustains full output where utility supply is weak or generator-backed, a common condition at urban rooftop and rural sites.-40°C to +75°C Operating Range — Supports outdoor cabinets without additional climate control, enabling 5G densification in locations without equipment rooms.Smartpack Controller Integration — Shelf-level monitoring reports per-module current and alarm status, simplifying capacity planning across a large site portfolio.Technical SpecificationsTechnical IndicatorSpecification Detail (PN: 241119.105)Rated Output Power3000W at Nominal Input (>185 VAC)Maximum Output Current62.5 A at 48 VDCDC Output Voltage48 VDC (Adjustable 43.5 - 57.6 VDC)AC Input Window85 - 300 VAC (Nominal 185 - 275 VAC)Conversion Efficiency>96.5% (High Efficiency HE)Module Dimensions (W×H×D)109 × 41.5 × 327 mm (Standard Flatpack2 1U, 1.9 kg)Operating Temperature-40°C to +75°C (Ambient)241119.105: Power Density as a Site Planning Constraint5G rollouts add radio units faster than most sites add rack space, so the DC power shelf often becomes the binding constraint long before the cabinet is physically full.Every additional module consumes a slot, a connector position, and part of the cabinet thermal budget, which means module rating directly determines how much radio load a site can support.The Eltek Flatpack2 241119.105 addresses that constraint by delivering 3000W and 62.5A from the same 1U envelope used by lower-rated members of the family.Fewer modules per shelf means fewer connection points, less wiring, and a shorter commissioning routine for field teams working under installation deadlines.Because the module shares the standard Flatpack2 footprint, shelves can mix 2000W and 3000W units, allowing existing sites to add capacity without replacing installed hardware.At >96.5% efficiency, the added power comes with proportionally less heat, keeping dense configurations within the thermal limits of sealed outdoor cabinets.The 85-300 VAC input window and -40°C to +75°C rating extend the same module to rooftop, pole-mounted and roadside installations where grid quality and climate both vary.Smartpack controller integration reports per-module current, so planners can see actual utilization and schedule expansion only when the shelf genuinely approaches capacity.Deploying the Eltek Flatpack2 241119.105 in 5G power shelves lets operators decouple capacity planning from physical space. Higher output per slot defers shelf expansion, reduces module count and wiring complexity, and keeps cabinet heat within outdoor enclosure limits. Compatibility with the standard Flatpack2 form factor protects existing installations by allowing mixed-capacity upgrades rather than wholesale replacement. For network planners executing dense urban and rural rollouts on fixed schedules, the 241119.105 provides a power building block that scales with radio load at the lowest practical slot cost.Technical FAQQ: Can 3000W and lower-rated Flatpack2 modules share one shelf?A: Yes, modules use the common Flatpack2 1U interface and are managed by the same Smartpack controller, allowing mixed ratings within a shelf.Q: How many modules are needed for a typical 5G site load?A: Requirements vary with radio configuration and site autonomy target; the practical approach is to size on measured load plus recharge current for the installed battery string.

Our warehouse is located in the core logistics area with convenient transportation, covering an area of 1000 square meters, designed specifically for efficient, safe, and convenient storage and distribution.

There are brand new UPS (uninterruptible power supply), precision air conditioning, and various types of telecommunications power products from brands such as Vertiv, Huawei, Eltek, and Delta in the warehouse, as well as base station and data center equipment. These products are stored properly under intelligent management and environmental control, ensuring that every customer can receive the highest quality and most reliable products.

Whether it is large equipment or small electrical products, there are strict quality inspections and records at every step from warehousing to outbound, ensuring the safety and cycle management of goods.

In addition to efficient warehousing services, we also provide comprehensive logistics distribution, covering multiple transportation modes such as sea, land, and air, ensuring worry free storage and instant delivery of goods.